>Aspirogom
  • Elongated gun-shaped tool to clean points

    PB GUN – Elongated gun-shaped tool to clean points that are difficult to reach. Ergonomic handle, external diameter 50 mm, internal 38 and 40 mm.

    PB GUN - Elongated gun-shaped tool to clean points that are difficult to reach. Ergonomic handle, external diameter 50 mm, internal 38 and 40 mm.
  • Flexible bent nozzle

    ALIEN 40 – Flexible bent nozzle, 90° angle, length 320 mm, internal diameter 40 mm. Also available in 38, 44, 50 mm versions.

    ALIEN 40 - Flexible bent nozzle, 90° angle, length 320 mm, internal diameter 40 mm. Also available in 38, 44, 50 mm versions.
  • Hand scraping tool

    HAND TOOL – Hand scraping tool, length 170 mm, internal diameter 50 mm, suction inlet 120 mm. Also available in 38, 40, 70 mm versions. Other diameters on request.

    HAND TOOL – Hand scraping tool, length 170 mm, internal diameter 50 mm, suction inlet 120 mm. Also available in 38, 40, 70 mm versions. Other diameters on request.
  • Non-marking, flat-inlet crevice tool

    CARS – Non-marking, flat-inlet crevice tool, length 240 mm, internal diameter 44 mm. Also available in 50 mm version.

    CARS - Non-marking, flat-inlet crevice tool, length 240 mm, internal diameter 44 mm. Also available in 50 mm version.
  • Rubber flat nozzle, length 200 mm

    RAKE – Rubber flat nozzle, length 200 mm, internal diameter 70 mm, suction inlet 120 mm. Also available in 38, 40, 50 mm versions. Other diameters on request.

    RAKE – Rubber flat nozzle, length 200 mm, internal diameter 70 mm, suction inlet 120 mm. Also available in 38, 40, 50 mm versions. Other diameters on request.
  • Curved cone, 45° angle

    PREDATOR – Curved cone, 45° angle, length 290 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions. Other diameters on request.

    PREDATOR - Curved cone, 45° angle, length 290 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions. Other diameters on request.
  • Adjustable length cone

    BIG CONE – Adjustable length cone, length 300 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions. Other diameters on request.

    BIG CONE - Adjustable length cone, length 300 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions. Other diameters on request.
  • Flexible bent nozzle, 90° angle

    ALIEN – Flexible bent nozzle, 90° angle, length 250 mm, internal diameter 32 mm. Also available in 38, 40, 44, 50 mm versions. Other diameters on request.

    ALIEN - Flexible bent nozzle, 90° angle, length 250 mm, internal diameter 32 mm. Also available in 38, 40, 44, 50 mm versions. Other diameters on request.
  • Bent nozzle, anti-static, 90° angle

    ALIEN 50 – Bent nozzle, anti-static, 90° angle, length 320 mm, internal diameter 50 mm. Also available in 38, 40, 44 mm versions.

    ALIEN 50 – Bent nozzle, anti-static, 90° angle, length 320 mm, internal diameter 50 mm. Also available in 38, 40, 44 mm versions.
  • Curved cone, anti-static, 45° angle

    PREDATOR – Curved cone, anti-static, 45° angle, length 290 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions.

    PREDATOR - Curved cone, anti-static, 45° angle, length 290 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions.
  • Slim cone, anti-static

    NEEDLE CONE – Slim cone, anti-static, length 255 mm, internal diameter 40 mm. Also available in 38 mm version.

    NEEDLE CONE - Slim cone, anti-static, length 255 mm, internal diameter 40 mm. Also available in 38 mm version.
  • Bent nozzle, anti-static, 90° angle

    ALIEN – Bent nozzle, anti-static, 90° angle, length 250 mm, internal diameter 32 mm. Also available in 38, 40, 44, 50 mm versions. Other diameters on request.

    ALIEN - Bent nozzle, anti-static, 90° angle, length 250 mm, internal diameter 32 mm. Also available in 38, 40, 44, 50 mm versions. Other diameters on request.
  • Hand scraping tool, anti-static

    HAND TOOL – Hand scraping tool, anti-static, length 170 mm, internal diameter 50 mm, suction inlet 120 mm. Also available in 38, 40, 70 mm versions.

    HAND TOOL - Hand scraping tool, anti-static, length 170 mm, internal diameter 50 mm, suction inlet 120 mm. Also available in 38, 40, 70 mm versions.
  • Flat-inlet crevice tool

    CARS – Flat-inlet crevice tool, anti-static, length 240 mm, internal diameter 44 mm. Also available in 50 mm version.

    CARS - Flat-inlet crevice tool, anti-static, length 240 mm, internal diameter 44 mm. Also available in 50 mm version.
  • Flat-inlet crevice tool, anti-static

    CARS – Flat-inlet crevice tool, anti-static, length 240 mm, internal diameter 44 mm. Also available in 50 mm version.

    CARS - Flat-inlet crevice tool, anti-static, length 240 mm, internal diameter 44 mm. Also available in 50 mm version.
  • Elongated gun-shaped

    PB GUN – Elongated gun-shaped, anti-static tool to clean points that are difficult to reach. Ergonomic handle, external diameter 50 mm, internal 38 and 40 mm.

    PB GUN - Elongated gun-shaped, anti-static tool to clean points that are difficult to reach. Ergonomic handle, external diameter 50 mm, internal 38 and 40 mm.
  • Cone with end tapered at 45° angle

    CONICAL NOZZLE 40 – Cone with end tapered at 45° angle, anti-static, length 195 mm, internal diameter 40 mm. Also available in 38, 40, 70 mm versions.

    CONICAL NOZZLE 40 - Cone with end tapered at 45° angle, anti-static, length 195 mm, internal diameter 40 mm. Also available in 38, 40, 70 mm versions.
  • Slim cone, anti-static

    NEEDLE CONE – Slim cone, anti-static, length 255 mm, internal diameter 40 mm. Also available in 38 mm version.

    NEEDLE CONE - Slim cone, anti-static, length 255 mm, internal diameter 40 mm. Also available in 38 mm version.
  • Gun-shaped tool with end tapered at 45° angle

    PT GUN – Gun-shaped tool with end tapered at 45° angle, anti-static and ergonomic handle. External diameter 50 mm, internal 38 and 40 mm.

    PT GUN - Gun-shaped tool with end tapered at 45° angle, anti-static and ergonomic handle. External diameter 50 mm, internal 38 and 40 mm.
  • Flexible curved tip with bristles, 90° angle

    SMALL BRUSH – Flexible curved tip with bristles, 90° angle, length 320 mm, internal diameter 32 mm. Also available in 38, 40, 44, 50 mm versions. For the anti-static version order the special conductive bristles.

    SMALL BRUSH - Flexible curved tip with bristles, 90° angle, length 320 mm, internal diameter 32 mm. Also available in 38, 40, 44, 50 mm versions. For the anti-static version order the special conductive bristles.
  • Curved cone, anti-static

    PREDATOR 38 – Curved cone, anti-static, 45° angle, length 290 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions.

    PREDATOR 38 - Curved cone, anti-static, 45° angle, length 290 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions.
  • Flat-inlet crevice tool

    ABYSS – Flat-inlet crevice tool, anti-static, length 430 mm, internal diameter 40 mm. Also available in 38, 44, 50 mm versions.

    ABYSS – Flat-inlet crevice tool, anti-static, length 430 mm, internal diameter 40 mm. Also available in 38, 44, 50 mm versions.
  • Rubber flat nozzle, wide-inlet tool

    RAKE – Rubber flat nozzle, wide-inlet tool, suction inlet 200 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions.

    RAKE - Rubber flat nozzle, wide-inlet tool, suction inlet 200 mm, internal diameter 50 mm. Also available in 38, 40, 70 mm versions.
  • Flat-inlet crevice tool

    ABYSS 50- Flat-inlet crevice tool, anti-static, long version, length 480 mm, internal diameter 50 mm. Also available in 44 mm version.

    ABYSS 50- Flat-inlet crevice tool, anti-static, long version, length 480 mm, internal diameter 50 mm. Also available in 44 mm version.
  • Flat-inlet crevice tool

    CARS 50 – Flat-inlet crevice tool, anti-static, length 300 mm, internal diameter 50 mm. Also available in 44 mm version.

    CARS 50 - Flat-inlet crevice tool, anti-static, length 300 mm, internal diameter 50 mm. Also available in 44 mm version.
  • Anti-static gun-shaped tool

    STEEL GUN – Anti-static gun-shaped tool with a fine tip for places that are difficult to reach. Handle in zinc-plated steel, external diameter 40 mm.

    STEEL GUN – Anti-static gun-shaped tool with a fine tip for places that are difficult to reach. Handle in zinc-plated steel, external diameter 40 mm.
  • Accessory of 50 or 70 mm external diameter

    CREVICE TOOL FOR OVENS – Accessory of 50 or 70 mm external diameter for removal of crumbs or burnt flour from inside industrial ovens for baking bread. Incandescent material is removed with vacuum cleaners fitted with NOMEX filters.

    CREVICE TOOL FOR OVENS – Accessory of 50 or 70 mm external diameter for removal of crumbs or burnt flour from inside industrial ovens for baking bread. Incandescent material is removed with vacuum cleaners fitted with NOMEX filters.
  • Plain tube in zinc-plated steel

    VACUUM CLEANER WAND – Plain tube in zinc-plated steel, 40 mm diam. Length 405/410 mm or 1320 mm for floors. Also available in polished stainless steel and in 50 and 38 mm diameters.

    VACUUM CLEANER WAND – Plain tube in zinc-plated steel, 40 mm diam. Length 405/410 mm or 1320 mm for floors. Also available in polished stainless steel and in 50 and 38 mm diameters.
  • Double curved tube in chromed steel

    TWO PIECE VACUUM CLEANER WAND – Double curved tube in chromed steel, 38 mm diam., fitted with quick-fit spring mechanism connection. Version in two pieces. Also available in stainless steel without quick release connection.

    TWO PIECE VACUUM CLEANER WAND - Double curved tube in chromed steel, 38 mm diam., fitted with quick-fit spring mechanism connection. Version in two pieces. Also available in stainless steel without quick release connection.
  • lain double curved tube in chromed steel

    VACUUM CLEANER WAND – Plain double curved tube in chromed steel, 50 mm diam., for use with PROMETHEUS floor nozzle for liquids, model with swivel connector. Also available on request 40 mm diameter version.

    VACUUM CLEANER WAND – Plain double curved tube in chromed steel, 50 mm diam., for use with PROMETHEUS floor nozzle for liquids, model with swivel connector. Also available on request 40 mm diameter version.
  • Double curved tube in chromed steel

    QUICK VACUUM CLEANER WAND – Double curved tube in chromed steel, 50 mm diam., fitted with quick-fit spring mechanism connection. Also available in stainless steel and aluminum. Other diameters available: 40 and 70 mm.

    QUICK VACUUM CLEANER WAND – Double curved tube in chromed steel, 50 mm diam., fitted with quick-fit spring mechanism connection. Also available in stainless steel and aluminum. Other diameters available: 40 and 70 mm.
  • Round brush with 50 mm diam. handle

    STEEL BRUSH – Round brush with 50 mm diam. handle, 90° angle, 100 mm diam. black disk, horsehair bristles. Also available with black, blue or white plastic bristles.

    STEEL BRUSH - Round brush with 50 mm diam. handle, 90° angle, 100 mm diam. black disk, horsehair bristles. Also available with black, blue or white plastic bristles.
  • Crevice tool, external diameter 50 mm

    CREVICE TOOL – Crevice tool, external diameter 50 mm for removal of dusts and liquids, flattened end to reach into deep crevices, length 500 mm. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 40, 70 mm diam.

    CREVICE TOOL - Crevice tool, external diameter 50 mm for removal of dusts and liquids, flattened end to reach into deep crevices, length 500 mm. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 40, 70 mm diam.
  • Two-way connector 38x38x38 mm

    DOUBLE CONNECTOR 38 – Two-way connector 38x38x38 mm, to allow connection of vacuum system air intake to two separate suction channels. Available in 40, 50, 70 mm versions, in zinc-plated steel or AISI 304/316 Stainless Steel, with different types of quick-fit couplings.

    DOUBLE CONNECTOR 38 - Two-way connector 38x38x38 mm, to allow connection of vacuum system air intake to two separate suction channels. Available in 40, 50, 70 mm versions, in zinc-plated steel or AISI 304/316 Stainless Steel, with different types of quick-fit couplings.
  • Metal two-way connector 70×50 x50 mm

    SPLITTER – Metal two-way connector 70×50 x50 mm, to allow connection of vacuum system air intake to two separate suction channels. Available in zinc-plated steel, AISI 304/316 Stainless Steel and different types of quick-fit couplings.

    SPLITTER – Metal two-way connector 70x50 x50 mm, to allow connection of vacuum system air intake to two separate suction channels. Available in zinc-plated steel, AISI 304/316 Stainless Steel and different types of quick-fit couplings.
  • Two-way connector 50x50x50 mm

    DOUBLE CONNECTOR – Two-way connector 50x50x50 mm, to allow connection of vacuum system air intake to two separate suction channels. Also available in 38, 40, 70 mm versions, in zinc-plated steel or AISI 304/316 Stainless Steel, with different types of quick-fit couplings.

    DOUBLE CONNECTOR - Two-way connector 50x50x50 mm, to allow connection of vacuum system air intake to two separate suction channels. Also available in 38, 40, 70 mm versions, in zinc-plated steel or AISI 304/316 Stainless Steel, with different types of quick-fit couplings.
  • Metal connector, 40 mm external diam

    CONNECTOR 40- Metal connector, 40 mm external diam., double external rib, to make joints between flexible hoses or rubber accessories. Available in zinc-plated steel, AISI 304 or 316 Stainless Steel. Also available in 38, 50 mm diam.

    CONNECTOR 40- Metal connector, 40 mm external diam., double external rib, to make joints between flexible hoses or rubber accessories. Available in zinc-plated steel, AISI 304 or 316 Stainless Steel. Also available in 38, 50 mm diam.
  • Metal connector, external diameter 50 mm

    QUICK CONNECTOR – Metal connector, external diameter 50 mm with female connection for quick-fit coupling to make joints between flexible hoses or rubber accessories. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 38, 40, 70 mm diam. and with female connection for different types of quick-fit couplings.

    QUICK CONNECTOR - Metal connector, external diameter 50 mm with female connection for quick-fit coupling to make joints between flexible hoses or rubber accessories. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 38, 40, 70 mm diam. and with female connection for different types of quick-fit couplings.
  • Metal connector, 50 mm external diam.,

    CONNECTOR 50- Metal connector, 50 mm external diam., double external rib, to make joints between flexible hoses or rubber accessories. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 38, 40 mm diam.

    CONNECTOR 50- Metal connector, 50 mm external diam., double external rib, to make joints between flexible hoses or rubber accessories. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 38, 40 mm diam.
  • Round brush with 50 mm diam. handle

    STEEL BRUSH – Round brush with 50 mm diam. handle, 90° angle, 100 mm diam. black disk, horsehair bristles. Also available with black, blue or white plastic bristles.

    STEEL BRUSH - Round brush with 50 mm diam. handle, 90° angle, 100 mm diam. black disk, horsehair bristles. Also available with black, blue or white plastic bristles.
  • Metal reducer 70 to 50 mm

    REDUCTION – Metal reducer 70 to 50 mm, for connecting the extractor hose to the vacuum system air intake. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Other diameters available for different types of quick-fit couplings.

    REDUCTION - Metal reducer 70 to 50 mm, for connecting the extractor hose to the vacuum system air intake. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Other diameters available for different types of quick-fit couplings.
  • Round brush with 40 mm diam.

    STEEL BRUSH – Round brush with 40 mm diam., 90° angle, 80 mm diam. black disk, blue coloured plastic bristles. Also available in 50 mm diam. with black, white or horsehair bristles.

    STEEL BRUSH - Round brush with 40 mm diam., 90° angle, 80 mm diam. black disk, blue coloured plastic bristles. Also available in 50 mm diam. with black, white or horsehair bristles.
  • Metal connector, 100 mm external diam.

    CONNECTOR 100 – Metal connector, 100 mm external diam., double external rib, to make joints between flexible hoses or rubber accessories. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 70 mm diam.

    CONNECTOR 100 - Metal connector, 100 mm external diam., double external rib, to make joints between flexible hoses or rubber accessories. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 70 mm diam.
  • Plain tube in zinc-plated steel, 40 mm diam.

    VACUUM CLEANER WAND – Plain tube in zinc-plated steel, 40 mm diam. Length 405/410 mm or 1320 mm for floors. Also available in polished stainless steel and in 50 and 38 mm diameters.

    VACUUM CLEANER WAND – Plain tube in zinc-plated steel, 40 mm diam. Length 405/410 mm or 1320 mm for floors. Also available in polished stainless steel and in 50 and 38 mm diameters.
  • Accessory of 50 or 70 mm external diameter

    CREVICE TOOL FOR OVENS – Accessory of 50 or 70 mm external diameter for removal of crumbs or burnt flour from inside industrial ovens for baking bread. Incandescent material is removed with vacuum cleaners fitted with NOMEX filters.

    CREVICE TOOL FOR OVENS – Accessory of 50 or 70 mm external diameter for removal of crumbs or burnt flour from inside industrial ovens for baking bread. Incandescent material is removed with vacuum cleaners fitted with NOMEX filters.
  • Anti-static gun-shaped tool

    STEEL GUN – Anti-static gun-shaped tool with a fine tip for places that are difficult to reach. Handle in zinc-plated steel, external diameter 40 mm.

    STEEL GUN – Anti-static gun-shaped tool with a fine tip for places that are difficult to reach. Handle in zinc-plated steel, external diameter 40 mm.
  • Crevice tool, external diameter 50 mm

    CREVICE TOOL – Crevice tool, external diameter 50 mm for removal of dusts and liquids, flattened end to reach into deep crevices, length 500 mm. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 40, 70 mm diam.

    CREVICE TOOL - Crevice tool, external diameter 50 mm for removal of dusts and liquids, flattened end to reach into deep crevices, length 500 mm. Available in zinc-plated steel, AISI 304/316 Stainless Steel. Also available in 40, 70 mm diam.
  • Round brush with 50 mm diam.

    STEEL BRUSH – Round brush with 50 mm diam. handle, 90° angle, 100 mm diam. black disk, horsehair bristles. Also available with black, blue or white plastic bristles.

    STEEL BRUSH - Round brush with 50 mm diam. handle, 90° angle, 100 mm diam. black disk, horsehair bristles. Also available with black, blue or white plastic bristles.
  • Plain double curved tube in chromed steel

    VACUUM CLEANER WAND – Plain double curved tube in chromed steel, 50 mm diam., for use with PROMETHEUS floor nozzle for liquids, model with swivel connector. Also available on request 40 mm diameter version.

    VACUUM CLEANER WAND – Plain double curved tube in chromed steel, 50 mm diam., for use with PROMETHEUS floor nozzle for liquids, model with swivel connector. Also available on request 40 mm diameter version.
  • Double curved tube in chromed steel, 50 mm diam.

    QUICK VACUUM CLEANER WAND – Double curved tube in chromed steel, 50 mm diam., fitted with quick-fit spring mechanism connection. Also available in stainless steel and aluminum. Other diameters available: 40 and 70 mm.

    QUICK VACUUM CLEANER WAND – Double curved tube in chromed steel, 50 mm diam., fitted with quick-fit spring mechanism connection. Also available in stainless steel and aluminum. Other diameters available: 40 and 70 mm.